Invoke Autotune from Mission Planner
Hello,
Is it possible to invoke the Autotune process from the Mission Planner GUI while in flight ?
Read more…
0 Replies
All Discussions (17281)
Sort by
Is this dumb? Sphere drone.
This is probably another hair-brained idea.
This is how this thing would (doesn't exist yet) work.
You take this sphere-shaped drone and put it in your hand, it's clean and ergonomic with the exception of a primary button, camera, some closed optional
Read more…Wanted Iris FS TH9x Controller / OR / Assistance to help repair existing unit
Does anyone out there have the controller and no Iris?? - I would like to buy an original 3 D Robotics controller - please let me know if you have one for sale.
My controller has stopped working, I have gone about as far as I can with fault finding
I
Read more…Mystery Radio FS, RTL. Any explanation in log?
I had a Radio FS today resulting in a (fortunately) successful RTL. I'm versed in basic log analysis but i'm not seeing anything that may point to why the FS occurred. As far as i can tell, it was momentary - a failsafe 1 followed immediately by a
Read more…Mission Planner Download Error
I'm getting a Forbidden 403 error when trying to download Mission Planner. Is there an alternate download or somewhere else I can get it?
Read more…You don't have permission to access /Tools/MissionPlanner/MissionPlanner-latest.msi on this server.
Throttle Not Arming Pixhawk new sounds
Hey guys,
I am working with Pixhawk, and for some reason my throttle is not activating. I know that the throttle/motor does work, because for some reason I bumped the throttle and it came alive for a second, but then it quickly stopped working.
This ha
Read more…Motor test fails on my X8 with arducopter 3.2 with pixhawk
I am having problems with my X8. Instead of taking off, it flips and destroys my GPS mast. It is not a configuration error because I bought it RTF from 3DRobotics and it did work in the past.
I think I am having a problem with the PDB or some ESC or s
Read more…Best autopilot option
Started with AMP 1 and 2, then moved to PX4, Pixhawk and Pidhacks. Looking for the most reliable open platform available. Did a little reading about the VR brain and looks interesting. What's the best? What would you trust high value payloads on,
Read more…Recommended OpenLRS system for Taranis?
I've been looking at OpenLRS, and from what I can tell there are multiple options, although I haven't found any module that plugs in the Taranis outside of the Orange one
http://www.hobbyking.com/hobbyking/store/__43852__OrangeRX_Open_LRS_433MHz_Trans
3dr x8
New x8 with flight view fpv set up, 3 axis gimble, go professional case,blue tooth module, 4- 10,000 lipos.
Perfect and flown 5 times. No crashes. Very stable. fly mapping misions with the go cam..not included
1650.00 plus shipping have over 2200.00 in
Read more…APM MavLink to FrSky SmartPort Converter with Arduino Nano and USB support [2.1.3 enabled]
At Airborne Projects we have developed a APM MavLink to FrSky SmartPort Converter6 based on the Arduino Nano, designed and tested with the Navio in mind, allowing for connection through the USB port of the Raspberry PI. Even so it also works with the
Read more…Two-stage voltage alert for battery voltage failsafe
This is a feature request:
On the A2 flight controller, there is a two level battery voltage warning. At the first threshold, the status LED turns yellow simply to indicate to the pilot that the voltage is low. At a second threshold, the status LED tu
Read more…Internal Compass not showing up
I just recently put together a quad build. I have used Pixhawk on a previous build and decided to use one on this build. I set everything up fine, did calibration, but sporadically got "Compasses are inconsistent" pre-arm warnings.
I went back today t
Read more…Can't manually override loiter movements.
HI,
I'm working on a small copter, and think I changed a setting I shouldn't have.. Or maybe something else is going on...
I can't overcome loiter drift... I'm hovering in my back yard w/ not great satellite reception, so the copter wants to drift al
250 size quad and ecalc predictions (way off)
Hi,
I built a 250 size quad, and ecalc says I should hover around 6.2A, and in the real world I hover at 12.2.
I've got a 650 size quad w/ 15" props, and it actually does slightly better than the ecalc predictions, so I was hoping the 250 would equa
AC3.3 RC8 works for retract?
1. FC : Pixhawk clone
2. Frame : U580 Pro ( Retract included. http://www.himodel.com/multi_rotors/HMF_U580Pro_Umbrella_Folding_Quadcopter_Frame_Kit_High_Landing_Gear_w_Gimbal_Hanging_Rail.html)
3. Tx : Taranis X9D
4. Rx : FrSky X6R
5. MP : 1.3.30.3 (
Default parameters for do_digicam_control in the survey tool
I've taken to using the do_digicam_control parameter in the survey tool when setting up mapping missions.
This gives me the camera command timestamp in the log, which I can then use for georeferencing the images.
However, unlike the servo command, I c
Read more…Altitude Hold/POS Hold dramatic loss of altitude
First of my Pixhawk has been working for over a year now without problems.
I have upgraded from an F450 frame to a Tarot 680 with DJI 800 propulsion system. This has worked for over 1 month but now after adding some extra's to the frame (retracts, pow
Read more…China Restricts Exports of Drones, Supercomputers
I saw an article about China banning the export of drone(parts) and supercomputer(parts).
It appears China is going to ban the more high end drones, including drones with "wind stabilization" and drones that can fly for longer than 60 minutes, accord
Read more…Need help diagnosing logs for APM flyaway
I need help trying to figure out why my hexacopter running APM copter (version 3.2, I think, but I'm not sure how to check) suddenly had a mind of its own. Here's what happened - you can see it all in the logs I've attached: I took the drone off in
Read more…