Hi,
My Minimosd works perfectly with my Pixhawk and Fatshark goggles but I have just installed a 3DR radio and the Minimosd stopped working. Remove the radio and it's back As the radio and Minimosd connect to the two separate telemetry ports on the P
Read more…I am selling a used 3DR 5.8 Ghz Video Transmitter Kit.
payment via paypal,
price including shipping (world wide) is 70 US Dollar
Read more…Hi,
What's the preferred method of interfacing the Arduino with a Pixhawk? And is there a guide out there somewhere for it?
I'd like to use an Ardunio(+Pixy) to locate and move a quad copter between indoor waypoints.
The only method I'm aware of is to u
Read more…Hy
I fly a QAV400 with Pixhawk and 980kv motors. I had done several AutoTunes in the past with this setup without any problems.
Now I upgraded the motors to 1100kv ones and now it happend.
Used the same PID as for the kv980 and set the copter to autotun
Read more…This may be the wrong place as I am using APM Planner (because Linux), but I'm not sure where else to put it.
I am curious as to whether anyone knows a quick way to add a browser window as one of the "custom widget" windows that you can create. My vid
Read more…My last hexcopter crashed due to a battery "puking" before it was supposed to. I typically got 15 minute flights, and at the 11 minute mark the craft began a controlled descent into the dirt. Luckily damage was minimal. My OSD couldn't support a 4 ce
Read more…Hello,
So today I was flying my S800 hex with APM 3.1.3 and pixhawk, I did 3 short flights. The purpose of these flights was to test my new gimbal. For gimbal control, I'm using mission planner, 3DR data radios, and a PS4 controller. For flight i'm us
Read more…We see a constant dialog of long range or long loft flight times...
There is a great development of a tiltrotor, and I do think it is the real start of another great type if VTOL craft with serious ground speed capabilities. The draw back is in no way
Read more…Hi guys,
I'm working on a project to create a wildlife protection network (which will become a NPO if technical/financial issues are not prohibitive) where drones play one of the most important roles, but I need the drones to be controlled via the int
Read more…Hi all
I have an apm2.5 with a cheap Chinese neo-6 ublox + compass V 2.0 board
and have been having problems in auto mode and circle.
on investigation i found that the mission planer compass display was very non liner
compared to the actual headi
Read more…For the last few years we have been developing the Wing 3D computer input device.
Having done quite a lot of work on Vertical Take-Off and Landing UAVs, one of the applications we are keen to explore is UAV control. - The upper part pitches, rolls, an
Read more…Thought the problem was a potentially faulty APM 2.6 so unwrapped my PixHawk. Same problem.
In MP, it connects and downloads the firmware. Pixhawk then gives the successful happy song. Select connect via Mavlink:
- starts 30 second countdown
- red co
Read more…Is there a graph for telemetry signal strength in the logs file or a "Graph This" when you click on "Tuning"??
Thanks, Brian
Read more…I'm new to all this but I have a question on how UAV determine their height above or below the launch site? I imagine on most flights, you place the UAV on the ground and arm it and it does a check on where it is and then you proceed to altitude abov
Read more…I have been interested for a while in the possibility of creating a VTOL fixed wing which transitions into forward flight after a vertical take off using multirotors. Finding this article prompted me to post this to ask whether this could be achieved
Read more…I need a way to control my gimbal tilt. I am using a dx6i for flying my copter and all 6 channels are used. Don't want now for another multi channels upgrade
Wondering if I can use a "Car Radio TX/RX" to control tilt and eventually shoot or yaw.
This T
Read more…--Sold-- Thanks!
I'm selling my new, never flown DJI S800 clone (RcTimer) with the Aluminum carrying case for $sold (+shipping & fees). Several spare parts are also included in the package. The total package retails for $1550.
Included in the S800 cl
This is weird. I am seeing my altitude, ground speed, yaw and vertical speed as well as my position in the Flight Data screen almost immediately after I click on "Connect" in Mission Planner however the connection popup window gets stuck at "Getting
Read more…This will be my first post here. Just sharing what I've been up to, and sort of documenting what I've done (particularly in the case that I have to back up a couple of steps and retrace them). I realize that I'm not the first to do a wifi based lin
Read more…Hi, I'm trying to use Bluetooth to communicate with my APM 2.6 telemetry port.
So far changed the baud rate of my BT module to 57600, paired it successfully on my PC and Android Tablet, but can't get it work on both MissionPlanner and DroidPlanner.
I t
Read more…