Hi
Im using this camera from hobbyking, and whenever i mount it on the frame the gps never get a lock, the blue led just keeps on blinking. When i remove the camera it gets a lock. Ive also tried to get a lock first THEN mount the camera and the blue
Read more…Hi guys - I know this has been done to death but I am looking for a set of plans for a reliable slow flying large payload UAV platform. I really had my heart set on a bug Telemaster but I can;t get plans or kits over here in Australia. It would be pr
Read more…I've been having trouble getting a fix with my LEA6 module so I'm going to try to hook it up to the computer via usb (thats what the headers are for on the top side right?). So I've choped an old printer cord and and downloaded u-center 7 but after s
Read more…My Quad is a Basic uDrones Quad with Sonar. (No Telemetry, No OSD, No Camera Mount)
Well I've been having a blast flying my Quad and getting better every time I fly. One of my goals to be able to fly around a friends house and take pictures of it for
Read more…So i recently purchased the ublox LEA6 gps from 3DR, I am having a really tough time getting a GPS lock. I have it hooked up to a battery and esc, sitting outside with an unobstructed view of the sky. It's been over an hour and still no lock. I live
Read more…Hello, i would like to test my APM on one of my planes.
My APM is now on my quad and i wanted to test Arduplane on one of my planes.
Putting the right firmware is not a problem, but what about parameters ...
I can save the parameters on the APM planner
Read more…Hi,
can you please be so kind and tell me where to find the Eagle files for APM 2.4 and APM 1.4.
Thank you.
Read more…Hi guys, first time I try the camera gimbal stuff (yeah I am overdue but fixed camera was fine until now)
I am trying to follow the wiki instructions, the new MP screen for the config seems simple enough...
http://code.google.com/p/arducopter/wiki/AC2_
Read more…Hello, is there a sort of "wish list" where some user can ask for some needs to the coders ?
There is surely an "issue list" ... so what about a "wish list" ?
Thanks.
Read more…Hello everyone.
I just finished building my another ArduCopter using DJI F450 frame today. However, i came across an issue. My motors don't spin after i armed them. I already pre-troubleshot by checking all the connections between APM to Radio, ESCs t
Read more…does anyone know why my cuad seems to lose its level point during a flight?
after a couple of mins flying against the wind, it seems to take the angle needed to fly against the wind as the new level , causing some ugly stick movements to keep it in th
Read more…So I flew this mission today. Lifted off, trimmed up the copter, and hit auto.
What it appeared to do to me, was go to waypoint 4, then waypoint 3, then land.
Is this because the mission course is to small? It is possible, it went to waypoint 1, then 2
Read more…I currently run my Mission Planner on my netbook with no real issues, but have managed to repair my . laptop that has a much bigger screen and faster processor . I have been trying to install Mission Planner on it but keep getting the same error. It
Read more…I'd like to ask for a feature request - when telemetry is running, would it be possible to periodically update and show the current home position. Since the home position can be reset if RF & Electrical noise cause a bad GPS reading during flight, i
Read more…hi guys
I have been out to test gps loiter for the first time, I waited until the gps module showed a lock , flew around for a few minutes without testing loiter,
landed, made another flight and at about 5 meters altitude i turned the loiter on to see
Read more…I have been flying my 915 radio for a few months now and it works great. So fat I have only flown about a half-mile out and the minimum signal strength is about 85%.
Hello everybody,
I am trying to make the follow me work, but it didn't work properly. There is a problem with the gps coords. The quad should recieve coords like Lat:48,884805 and Long:9,08266388 but it recieves the one shown in the image below.
I fou
My APM 2.5 has just arrived and I have soldered on the headers. On inspecting the other connections I noticed the I2C socket and the non surface mount GPS connectors had not been soldered on properly (only tagged on one pin). I am not sure this is ho
Read more…One thing about Chinese motors. They are cheap and you can build a prototype quickly, but the Chinese can't make ball bearings to save themselves! After 13 flights I had a motor fail. I ordered two replacement motors from hobbyking since there's
Read more…Hi Droners
I am happy to announce that we now have Skywalker 1900 and X8's in stock and available to the South African market.
These Excellent FPV/UAV platforms will we distributed via our retail stores (www.clownshobbies.co.za) and our on-line store (
