Hi,Are the dimensions of the APM 2 Board somewhere written down?I just ordered the Hardware and to prepare the quad for the new board even when it Takes another 4 Weeks till arrival. Thanks Michael
Read more…Hi,
It would be great to list existing, few good related forum threads along with each product page. May be done automatically or manually via tags? In that way, it is much much easier to find more information on a product?
What do you think?
best reg
Read more…Hey everyone
Happy new year!
I have attached a diagram of the way I want to wire up my APM. I would really appreciate your input :)
Thanks
G:)
Just received my 3D printed frame back from Shapeways, and I thought I'd post up some picture in my Blog. But, it's been taking a while for the moderators to update my blog. So, here are some pictures, and an update.
Here's how the parts come, right
Read more…Hi All
After adding my FPV equipment my quad’s weight is 1.2kg (Still want to add my GoPro 2). How much can the standard Ardcucopter take ?
My setup:
ArduCopter Quad v1.0
Motor AC2830-358 850kv
2800 battery
Thanks!
Willie
Read more…with my apm1 I always used the mb1200. I now have a apm 2 and sold the apm 1 + sonar. Which sonar is recomended now?
Read more…Hi All,
I'm trying to setup the Radio input. I've connected the LiPo to PDB, Installed latest firmware, connected turnigy 9x receiver..
Couple of questions..
1. Soon I switch on the power, I get beeps from ESCs an motors rotate slightely in 1 second in
Read more…Hello,
I have what seems to be a fully functional ArduIMU v2. I can program it via Arduino IDE and see the output on the serial console. Everything seems to be working quite fine but there is a peculiarity that I have not been able to reconcile.
When
Read more…I received my 3DR kit yesterday and began assembly this morning. I noticed that there are differences between the PDB I recieved and the one pictured in the 3dr instructions. The new board has no motor indicators and the positive and negative side
Read more…After I crashed my original arducopter frame I was looking for a new frame. I really wanted a foldable one so I can take it more easy with me on holidays. For the hell of it I bought the foldable x525 frame from goodluckbuy wich is $42 incl. shipping
Read more…Hi, the latest version of mission planner wont start on my netbook, the screen comes up along with the black box but no text appears in the black box, after a few seconds it all disappears, since my laptop died a couple of months ago I have been tryi
Read more…A while back I was asked if there was a way to work out the volume of compost stacks at a local company that manufactures compost.
So you've got 20-30 +-5m high piles of compost. The way they currently do the volume calculations is a GPS is "walked" o
Read more…Has anyone removed the shield to allow remote location (for traditional heli)?
Looks like it's possible to desolder the 6 pins (actually only 4 are soldered), and make an extension harness.
Read more…Hi, I am a newbie.
I have done some research for the past week and I am really keen to build a Aeroquad FPV with UAV capability to use the Ardupilot sofware..
My question is ; Can I build the quad with the Arduino mega 2560 , Aeroquad sheild 2.0 with
Read more…Iv noticed that hobby king sell exactly the same looking turnigy motor as Jdrones and DIY drones's AC motors.
The specs are a little different though.
Are the AC motors specifically made for the arducopter? Eg different number of poles/more or less win
Read more…Hello,
I am trying to assemble power Distribution board and i have searched on Wiki site. I also found manual for the power distribution assembly. However, there is old version of the power distribution board in the manual. Can anyone tell me how to s
Read more…I'm using Planner 1.1.14 with a new APM2 purple board, Win XPpro and the Atmega2560 inf driver file from the repository.
Planner loads and verifies version 2.27 firmware but it does not connect to the APM2. I have used Putty and it does reset the APM
Hi
I have APM 1 with processor 2560. When i just power the APM board with RX pins connected the PPM encoder is blinking ( working condition). But when i put the IMU shield on APM, the PPM encoder is solid blue. And RX values are zero.
What could be the
Read more…Does the current version of APM allow for the display of current Amp draw, accumulative mAh used and mAh available?
I am considering adding a current consumption module as described here http://code.google.com/p/ardupilot-mega/wiki/Voltage, but if I c
Read more…I'm using Planner 1.1.14 with a new APM2 board. Win XPpro and the Atmega2560 inf driver file from the repository.
Planner loads and verifies the 2.27 firmware but it does not connect to the APM2. I have used Putty and it does reset the APM2 on connec
Read more…