Hi,
I am new to pixhawk. I am using pixhawk cube 2.1. I need to use pixhawk's own barometer to calculate the altitude. Please guide me that how to get readings of the barometer or the baro altitude. I am using PX4 firmware version 1.6.3. In the mavlin
Read more…Hi all.
I am putting together a fixed wing UAV with a Pixhawk 2.1 flight controller, four 9-gram servos, dragonlink rx, RFD900 telemetry, and optional FPV gear. I use a 40A ESC with a built in 4A (S)BEC. It is advised to power the RFD900-radio directl
Read more…I am trying to send custom status text to my SITL application(it is standard simulation basen od sim_vehicle.py)
I am tryging to send simple message from pymavlink to MAVProxy command window.autopilot.mav.statustext_send(6, 'D06DDDDDDDDDDDDD', force_m
With Flir Vue Pro GPS Geotagger you will be able to save GPS (Latitude, Longitude, Altitude, Universal Coordinated Time – UTC) information directly as EXIF information to images when shooting picture with your Flir Vue Pro/Pro R.http://www.dronebase.
Read more…Hi there,
I am flying indoors over a cluttered floor in AltHold mode and I am having issues.
The altitude varies as the drone flies over things and the drone kinda keeps its altitude constant with respect to the obstacles below. This is not what I want
Read more…I've been flying with my alexmos Gimbal with a Sony A7r and occasionally get judders and shake in the footage. I tried yesterday without the in camera stabilization and it's a nightmare (hats off to the Sony). Here's a quick vid i've upped from today
Read more…Hi all!
I am having a huge problem. I have a 900 mm hexa (with Pixhawk 2.1 RTK) that have to fly soon. It has six Tiger Motor MN4014-9 400KV. And also six Maytech Multicopter 45A Opto 2-6S SimonK ESCs. In the manual it says Tiger-motors may stutter.
So
Read more…Good morning, |
Hello,
I followed this tutorial (http://qgroundcontrol.org/mavlink/create_new_mavlink_message) to create my custom mavlink message but I'm not sure which files in ardupilot directory should I modify.
There are several common.xml files inside ardupilot
Read more…We are selling this X-UAV Talon Max airframe.
Asking price: USD$1,200 / AUD$1,500 (plus shipping)
Location: Perth, Western Australia.
(We purchased for USD$2,333 from manufacturer).
Purchased directly from X-UAV approx 18 months ago and we have never to
Read more…Greetings. I am what I would describe as a high level intermediate pilot. I've been flying for about 10 years and I have used all manner of stabilizers and flight controllers on Rotor and fixed wings. I tried iNav and had to give up on it. I bought a
Read more…Hi Guys! I have a Cheerson CX-20 with APM 2.8 + GPS/Compass Ublox 9 + 3dr Telemetry. All calibrations made on Mission Planner.
Only perfect flights on Loiter, Alt Hold, Stabilize and RTL.
My Problem:
When load a mission and try to Takeoff in Auto mode
Read more…The Splash Drone 3 accompanies all that you require in one package. It is waterproof, floats and has a 4k camera that can see underwater and click HD videos.if you can buy this then contact us.
Read more…Hi!
I am having this strange servo movement on my APM 2.8 with APM:Plane.
It happens on all flight modes.
Is it normal?
Video: https://www.youtube.com/watch?v=PkxNvuSkpBw
Thank you!
Read more…Hello,
I am new to pixhawk. Please let me know what is the major difference between between pixhawk 2.1 and pixhawk 2.4.8 on the basis of performence . I know there is redundancy in pixhawk 2.1 as it has more Gyros/accelros etc.
Read more…This Dragonlink V2 UHF system is a great long range FPV solution. Asking price: AUD $200 (plus shipping) Located in Perth, Western Australia. It has been used but it works great. We were using this with a large fixed-wing drone and Spektrum DX7 transmit |
Hi Everyone !
I built a hexacopter using DJI S900 frame and Pixhawk 2.4.8 as a flight controller. I got the motors to spin in sync and while I was testing my drone I noticed that, at around 30% of throttle, one (or more) ESCs stop (every time diffe
A while back I bought some RFD900+ modules thinking that they were encrypted. When I configured them there was an option for AES encryption so I enabled it. However now that I have done some testing the encryption does not seem to work. Does anyone k
Read more…