I posted this first on the Pixhawk group, on second look, this is not a pixhawk specific issue, so re-posted hear. Thanks for your comments.
I am currently working to reorganize my radio channels, functions, and switches to use all 12 channels on my
Guys, I've got a cheap Chinese brushless gimbal I use with my copter. It works well however I stumbled across a quastion I have no answer to.
Is there any way to "lock" it (one or both axes) as if the camera is directly mounted to the quad? It's all n
Read more…As anybody come across this problem...After updating to Mini OSD Extra 800 and upgrading the characters set the information on the screen doesn't much look like the basic set-up... The horizon doesn't show like a line but mix up of various characters
Read more…Anyone managed to get pixhawk to control the t4-3d gimbal?
i've tried following the same steps in the wiki but that was for the 2 axis gimbal
http://copter.ardupilot.com/wiki/common-tarot-gimbal/
i cant get control the gimbal at all. It works when i plu
Read more…http://docs.house.gov/meetings/PW/PW00/20160211/104471/BILLS-114-HR4441-D000619-Amdt-38.pdf
"
‘‘§45509. Micro UAS operations ‘‘(a) MICROUAS CLASSIFICATION.—There is hereby established a micro UAS classification of unmanned aircraft systems, the aircraf
Read more…I'm working on a project that consists on control my APM with visual studio c++ code. I did the first step: sending a hearthbeat message to APM and receive some parameters like yaw, pitch and roll. I can Arm and Desarm too.
My problem is: I want to se
Hello. I'm working on the Iris+ drone of my University in order to add some new sensors (it's the purpose of my master thesis) but I don't have experience in programming. Right now, in order to make the first simple attemp, I would like to connect an
Read more…After near tree months I recived happy the Lidar Lite V2, but now I have a concern because, apparently is discontinued?
something wrong with this thing?
It's a risk to put on my quad? :(
Answer I recived: Lidar was purchased from Garmin, so It's going t
Read more…Hi everyone,
I have not been on DIY for a while. I moved on to racers and mini drones.
But I missed playing with Mission Planner and Tower.
Since I have been on this site the new FAA regulations were introduced. But thats 250g and above.
I like doing
Read more…from:
"
The last title includes a research plan on integration to the NAS, including equipment, certification and provisions for UAS airworthines
This is my first drone Arducopter based (2.8 versión, external GPS, frame Ifly4), and after a while finally I get ti on the air...but the drone is very unstable, during the flight moves continuosly from one side to another, like a overcontroled RC pl
Read more…Anyone have experience using this batteries in quadricopters? results?
Read more…Hello. I did the compass motor calibration various times and checked the results.
I have APM 2.6, external compass + gps module UBlox Neo-6M, turnigy plush 12Amp ESC's, and a 2.7Ah battery. The apm is mounted on an anti-vibration stand on the top of t
Read more…I have a clone Pixhawk which I have been using with two 3DR modules, one attached to a bluetooth module, which connects to my Android device.
After a year of working perfectly, the 3DR telemetry is not being transmitted any more, although my OSD is re
Read more…I would like to add a computer vision to my quad. My end goal would be to have the quad stop and hover over a certain object (red disk in green field) when it comes in contract with it during a mission. Would the PX4FLOW work for this application? Or
Read more…Hi,
could you explain if the speed and altitude on the following screenshot are for real ?
Altitude: 3.5 m
Speed: 2359.1 km/h
http://qgroundcontrol.org/_detail/screenshots/fly.png?id=screenshots
http://qgroundcontrol.org/screenshots
The above
Read more…When you command a quad to go forward, it tilts forward, and that creates a forward "thrust".
What would happen if I attached a horizontal motor/prop onto the quad, and provided a horizontal thrust that way? Would the quad maintain level?
Hi everybody,
I'am trying to setup an arducopter from Arducopter FC 2.8 The package cames with a nice external GPS and I am trying to use an Ifly fram, using a solid frame intended to use with Ifly FC V4M. I am using the same motors and ESC (PPM oper
Read more…
