Does anyone have an N number for their IRIS yet? I've come across an issue that's stumping me.
To fly commercially, one needs a 333, a COA, and a registered aircraft with an N number (among other things). You cannot currently apply for a COA without a
Read more…Why do people have permission to message the whole group with spam that should be a discussion?
Read more…Having an issue where my Iris will return to launch about halfway into a Tower app mission. Once the Iris is launched and switched to AUTO, the thing takes off and lets me know that it's approaching the 2nd waypoint. Then I get a battery level notice
Read more…Appreciate some help identyfying this snag
The original 3DR controller stopped working and I have replaced it with a Taranis Plus.
Using Iris with this setup Fr Sky D4R-II RX / Taranis Fr Sky DJT TX:
When connected via Mavlink, Mission Planner shows t
Read more…Hi Alls.
I'm sorry to put up one question by another. After I update my firm ware because of the control show all 0 value. Then the problem start. When i start to dis arm is show PreArm: Need 3D Fix.I don't know what is that and where to look for. I h
Read more…My Iris+ show no voltage at the control. All lights are up and other figures had shown.The battery is full charged but the screen show 00 vlt. I change other 2 batteries show same. What I have to look for. Also frequently have to re calibrate the rad
Read more…Hey gang. I pulled out my daughter's loose tooth with my 3DR Iris, and it's going to be featured on The Doctors show on national TV today
https://www.youtube.com/watch?v=6uyUmnr0JIE
Read more…
i been working a lot and finally had time to fly the IRIS+ , great lil copter.
but i am having a minor issue of how to change the orientation of how it flies.
it appears that it sticks with how i am positioned in flying..
yaw works ok,, forward and back
Read more…I am using my Iris+ for about half a year now. Without any major issues. All is running smooth.
There is just one annoying issue that with a 2-axis gimbal (Tarot) I always need post video stabilization as there are strongly visible yaw movements.
I hav
Read more…My previous discussion was channel 1 no signal. My remote show not data.So I try to open the top cover of Iris+ to see anything that came loose. After I open the cover I saw one harness from the receiver was not plug in. I don't know is accidentally
Read more…My Iris+ won't start and I look at the control the dot is way off from right bottom for disarm. So I try to calibrate and it show the error message of "Channel 1 no signal. I've 0 experience for the system. Just know to fly only. But I can take apar
Read more…A few days ago I happened to update the iris using the PC software Windows MISSION PLANNER since that time can not display the consumption MAH battery or battery voltage in the rc (by pressing the DOWN key on the RC).
I need your help to reactivate th
I have a couple of issues that involve droid planner that I can't figure out.
1) before launching I clear the old way points. All I want to do is use the telemetry to keep track of the Iris in flight. Upon launch, as soon as it gets to about 10' the p
Read more…I lost my 3dr ground station from iris+. So, should i buy new 3dr ground station along and connect it to air station? or i need to buy both air and ground stations and change it in the iris+ guts?
Need a good answer because i'm a new in such questions
Read more…I took the guts out of a old Iris+ and put most of the parts on a 470mm frame. I have a Q-Brain 4 in 1 25A ESC going to cheerwing 920KV motors. During standard calibration the motors twitch and one of the motors smoked a tiny bit. This is with a 5200
Hello, new to flying. Bought an Iris almost 2 years ago and never had a chance to fly it. Also bought the Iris plus upgrade kit when it was available. One of the first things I wanted to do when I retired was to fly this bad boy. So the other day I d
Read more…Hello again,Can't seem to find what is the lowest battery voltage you can safely go down to before replacing the AA batteries in the controller. Could only find the lowest voltage for the lipo batteries in the Iris.Thanks.Loran
Read more…Hi I have got a ilook+ camera for my iris+ and can you tell me how I can take photos useing my transmitter radio can it be done I posted this the other day but no replies at all
Read more…I might have connected the battery of the controller in a reverse way.
So immediately, 1-2 seconds later, I could smell burning smell and see white smoke.
After that, the controller didn't work. Couldn't power it on.
What should I do?
(1) Is there any wa
Read more…Hi just got a camera ilook+ takes great videos but how can I take photos with iris+
Read more…