I am getting started on developing an IMU for the paparazzi system. Anyone that would like to throw in their comments and ideas would be appreciated. In the end I can read the tech docs and come up with a lot of the values myself but I might need an
Read more…I just thought I would give the latest version of the GCS a shot on my XP laptop and when i run it I get the error VI is not executable please download full development version to fix these errors. It appears to load ok but no google earth. Why do I
Read more…Hi there,
I am using Ardupilot with Ardushield V2, Ublox GPS and throttle control through ardupilot.
Firmware: Ardupilot V 2.7 (latest version from the project's website).
1.) How do I set up the altitude for the return to home? Or is Ardupilot just try
Just before sunset, new ixus 100s camera, ardupilot + other stuff, sh*t, f*ck and so on.
Goldberg Electra + tsunami 10/15 + Rhino/Zippy 3700mAh Lipo (!)
Maybe too windy, it takes fine 1st turnpoint upwind, but next downwind TP, i think last and then la
Read more…Will there be built-in OSD on the Arducopter? If not, will it be possible to integrate some of the data like GPS, battery life and altitude to an OSD system like eagle tree? I know the eagle tree comes with GPS but if the Arducopter already has it th
Read more…I am working on a motion tracking project using an ArduIMU+ V2 and am wondering what the unit of measurement is for the Accelerometer output.
Read more…Hi ,
I am Doing project on location tracking using inertial sensor, I have ADXL335 board. I am not good in programming. I have a task to make a programme to transfer the data from the board to the terminal device (siemens TC 65). In short , I have to
What about using a mobile phone instead of the xbee as telemetry? Connect through usb or bluetooth. Then you also get a free camera or video camera as well. Any idea around this?
Read more…Hi folks,I was thinking about writing some code to automatically detects full movements of servos.Here is the pseudocode:first turn on ur transmitter and save neutral of all servos:for (int i=0;i<8:i++){neutral[i] = servoPos[i];}Move roll right:for (
Read more…Who bought/used this gadget? (approx. €139)
http://www.beastx.com/content.php?1-Startseite
Any help really appreciated, I'm stuck!!!
1. I can successfully load the Ardupilot IMU software on the IMU board no problem using a Windows 7 laptop and a Cool Components FTDI cable. The test software moves the cube etc and the GPS data is picked up
Read more…Hi All,
Hi all,
i and completly new to the site so please bare with me!! my goal is to use the GPS part of the drone for tracking my movements as i walk, run or ride my bike. so what are your thoughts? can it be done? and most importantly HOW!!
Read more…
Hi,
Hi,
We've just received our arduimu v2+, we've got problems to upload the arduino sketch to it.
I am using the APM and the GCS. When I start everything starts up and works, but my Alt is about 235 meters at my home location and the white needle pegs out over the 200 meter mark. Is there anyway to change this or zero out the needle back to 0 whi
Read more…Hi all,
I'd like this discussion to focus on the bits we need to know or can modify specifically for our UAV's.
I know there are lots of forum discussions elsewhere on the Turnigy/iMax/Flysky Tx but none just for UAV
Brett
Read more…is their a seperate forum for dev progress/ideas etc, as dont really see much of that here and most of the commits on the public board are just wiki changes, just wonderin if me missed it or if ppl are busy on their own
Read more…The RX0 pin on the chip is fried. Is there a way to program the MEGA on RX1/TX1 instead of RX0/TX0 ?
I also have an isp programmer.
Earl
Does any idea how much the dragonplate carbon fiber weights?
