Hallo,
ich verzweifel am Missionplanner. Ich bekomme keine Höhenanzeige in Flightdata. Weder vom Sonar noch vom Baro. Sensortest via Terminal/Test/Sonar bzw. Altitude ist ok. Luftdruck wird in Flightdata angezeigt aber kein Höhe. Nach "Connecting" ste
Read more…I have:
OS MAX ESC, OCA-170HV
3825-750 OS MAX motor (specifically recommended by OS MAX)
APM 2.5 with full updates as of 2/16/2013
JP1 is REMOVED so I can power the servos separately
There is NO BEC with my ESC, power comes from a 5v BEC that can carry 5A
Read more…
Update: Newbie pilot error. Accelerometers were not calibrated correctly. Leveled frame and APM, recalibrated accelerometers and can now hover stably in stable mode. Reloaded FW 2.9 and hover shows no remarkable differences. Conclusion: In my ca
Read more…I am building conventional plane (not flying wing) which i have ailerons and elevator, but wish to omit the rudder (to save weight and complexity).
Question, will the APM 2.0 be able to RTL without rudder ?
Best Thanks
Rob
Read more…sorry if this is an answered or dumb question, if i install apm2.5 in my raptor 30 can i pull it later and use it in a fixed wing application? or are there two separate devices, one for copter, one for fixed? thanks. -mark
Read more…Can anyone tell me, or give a link to information, on how I would go about editing Mission Planner, in particular the Auto waypoint function that generates grid version2 so that it generates the waypoint file with either DO_SET_SERVO or DO_SET_RELAY
Read more…Group:
We have a situation where our ground speed needs to be constant during our mission, but need to switch to air speed during landing.
So - is is possible to switch remotely between airspeed and ground speed?
Thank you.
Bret C
Read more…hi
I have no lights showing on my reciver on the 3dr hexa copter. This is a ready to fly hexa copter from udrones. I have checked all cables, and my lipo is powering my apm 2.5. Can somebody please help
thanks
thomas
Read more…Hi all
I need a replacement GPS, I LOVED the old "small" mtek GPS (this plus this) but 3DR is no longer selling them as a unit. The new "large" GPS units don't fit my model very well and I don't need a battery backup.
I've found this on JDrones site:
Read more…Hey folks,
I have a new project where i am wanting to use an Arduino uno to switch a few bits of electronics (including an LED) on/off. I have been reading everything on transistors and resistors and arduino outputs and leds and am lost in a maze of f
Read more…I have been trying to isolate an intermittent servo twitch the last couple days. I have the APM 2.5 in an X8 running ArduPlane 2.68.
I have power going to the output rail with a 5V Castle BEC.
The twitch is very random and fairly small deflection. In m
Read more…If you don't know, Michael Oborne is the author of the Mission Planner we all use and love.
The latest version I'm using is 1.2.35.
For a long time I've wanted to buy a beer for Michael to thank him for his efforts and time in writing and updating the
Read more…We've had some reports of poor GPS accuracy in 2.9.1 as compared to 2.8.1. This discussion is to debate, test, conclude and if necessary fix issues related to GPS accuracy in 2.9.1.
Hello All.
In my first "profile presentation" I'd like to show you a small piece of my work on airframes for the last 15 years or so... I like building planes with foam and composite materials mostly. If I have to use wood, it will be for reinforcemen
Read more…i have my 3dr hexa powered up (i bought the ready to fly version) when i turn my dx7s on nothing happens. can anybody help
thanks
Read more…Well, after a long time in the theoretical world, I decided it's time to see how APM works in reality, so I splashed some cash and ordered this and a bunch of other parts from Hobby King:
At this point, my MS Excel OCD set in and I felt the need to f
Read more…Anyone knows the reason why the Optical Flow sensor is not available anymore?
Is some replacement hardware on the way?
Read more…Hello – it is great to have another builder! So far I really like the fuselage. It is strong and light with lots of space inside. Also it has a good aerodynamic profile. The kit is light weight and looks like a quick build. I am very interested in yo
Read more…Good day everyone, Please view this link and sign a letter we are sending to the Senators of Oregon in reply to the legislative rule... Thanks everyone for your help,
|
Visit Civilian UAV at: http://aerosight.ning.com/?xg_source
Read more…Hi everybody!
I just invested in an Ardupilot Mega 2.5 with a datalink set. I was wondering if there was some code allowing the autopilot to receive commands from the datalink?
My plan is to use a conventional transmitter but also to be able to use a
Read more…