Hi,
can somebody post additional photos of the Skywalker building, would be nice to see where
all the boards where mounted, the gps, xbee, receiver, video etc etc.
I've been looking at the existing pages, but there are not many details
Thank you.
Hello!
People, I want to developed a UAV, but first, I want understand and make same experience in ground of course... I want to move a servo in arduino by joystick. I know, we dont use Arduino, but is similar, so, I think thats ok to help me. I want
Hi all
I have a SF 9DOF Razor IMU with the supplied SF firmware connected and talking to my PC via a FTDI card and USB cable. I tried a Bluetooth link but the supply of data to Python was not consistent causing Python to lock up. I have tinkered with
Read more…So I guess 2.7 is the latest Ardupilot software.
For a first-time user is it 'best' to use the latest? Or should I start with a tried-and-true version that may not have the latest add on?
Read more…Hi All,
I Have a question abouth the 3 micros the system has, can somebody explain which micro does what
in the whole system ? I know the mega has 2 micros and the IMU has 1, correct ?
I would like to know what they do an how they comunicate between t
I'm getting ready to run some of the individual tests in the Test Suite and had a couple questions before I actually start.
My configuaration is as follows:
ArduPilot code 2.6.2
Shield V2
Ublox
X,Y & Z sensors
The manual online states the following:
The
Read more…Reading through the APM manual and APM code I have found a line that worries me. In the code an IMU calibration needs to be done to show level flight but in the manual I cannot find a reference. I can only assume flying while data logging will supply
Read more…I am wondering how much Elapor the MediaTek will function through (if at all)?
My Garmin eTrex Vista still gets signal inside the easystar but I cannot see if the MediaTek is :D
When I connect my PC to the APM and run the Arduino interface, I open the current version via my sketchbook (updated thru SVN) and I see all the tabs ready to change and upload. My question is, do I always overright the previous settings or is there
Read more…What is the main difference in terms of capabilities between these two? The ArduPilot Mega recommends one of these two. I ask this because the uBlox is more the twice the cost of the MediaTek GPS module.
Had a relatively good one today. Kind of fun to watch on the video.
Can anyone tell me what the standard for the MTK is supposed to be.
I ordered 4xmtk gps units. I still need to investigate why one gets a fix and the other 3 do not.
Before I rip out Jordis firmware from the mtk (if it exists) I would appreciate an u
Read more…Hi all,
I am starting with a UAV/FPV project and after spending a lot of time reading my choice is clear (or not)
I am planing to use the ardupilot-mega with all the recomended hardware in the homepage.
As Chris Anderson suggested I will use a Skywalk
I thought it would be an interesting idea to get to know any fellow DIYers out in this area, and possibly start a collaboration, or a group to be able to work on projects. I have a senior telemaster that I am fixing up in preparation for a drone proj
Read more…I was curious if any of you have delt with BanaHobby before. I also was looking for opinions on two different planes. Would either be okay for a UAV?
I plan on building an Easy Star or something similar for testing, but I may end up wanting to convert
Hello All,
Hello:
Hi to everyone , I was trying to find if anyone have analized the entire code , why? well I bought the ardupilot mega plus the ArduPilot Mega IMU Shield. I'm developing a proyect so obviously i don´t want to download all codes and upload them to my c
Read more…Today I built in the Ardupilot Mega for the first time into a plane to verify the functioning of Stabilize and FBW_A modes. I just wanted to get some debug output and see the servo's functioning. After discovering that my GPS needed a reflash and the
Read more…Hi all,
I am using a Xbee Pro 900 with the Xtreambee adapter which is connected to my laptop with an FTDI cable. I have the latest version of X-CTU (v 5.1.4.1) running on Windows 7.
I selected the correct COM port but I get the errror message 'Unable
Read more…