https://www.youtube.com/watch?v=tgWIdpegfuc
Any idea what hardware this guy is using ? Its truly non line of sight flying thanks
anybody have any luck with shaving down rigid foam sheets to make better wings ive been thinking about doing this for weight managment . or even any ideas about how to do it better
Read more…I would want to know more about servos ( i am new and dont know alot of thing).
I undertstand Servos are DC motors with built in gearing and feedback control loop circuitry. And no motor drivers required!
can i anyone give me more information about s
Read more…I just put together my new APM + Oil Shield. I loaded the aeroquad and arducopter gui's and it seems my Gyro X and Y are not receiving good values. I also ran the ADC test example and the reading also looked funky. What are the chances of my chip arr
Read more…Test arduimu. Recommended programs to test the immu are not working. The SetupDemo IMUv113 runs without errors but does not present the data. The SerialServerVi not work (file "WSC32.DLL" not found).
The software utilities ArduIMU Demo1 also run witho
I have uploaded the code to the APM. The board is on a flat and stable surface. When I start the serial monitor I will receive a high accel Z, as you can see here.
2061,2016,2456,1673,1678,1680,1578,2828
Is there anything wrong?
If not can it be cali
Read more…How do you compile code for the DSP on the gumstick? I have only seen where you have to use code studio or code composer or some kind of IDE with complier and it costs quite a bit of money unless you get the free version which is basically a student
Read more…Curious and need to solve, why there is no output to servos in stabilize mode for APM
True I do not have GPS working (attached but seems not to work) but stabilize mode should not need GPS. Correct?
Any advice gratefully received.
Here's start of log:
I
Read more…Simple question....Can you use the ArduIMU and the MediaTek GPS receiver together? When I go to upload the IMU code there is no option for the MediaTek receiver.
Read more…Hi
Could I please build on your vast knowledge.. I have a thermo setup with telemetry ect. When in fly_by_wire mode and trying to check the gains settings. Movement to the right left or pitch up or down has very little effect on the attitude of the p
Read more…Is there a definitive guide somewhere as to how to interface the SCP1000 (I2C version) from they DIYdrones store to the ardupilot or ardupilot-mega?
It was suggested here, by Chris, that a mod to the ArduIMU V2 (flat), similar to that made on the APM Oilpan, would help eliminate (or at least tame) the linear acceleration problems being experienced by some. The mod involves removal of filter capac
Read more…I feel this topic is not exactly related to UAV's. But i am seriously working on ...
I am trying to work out which is the best budget radio set for ardupilot mega I have been looking at the specs and manuals for the futaba 6ex and spektrum dx6i but I am struggling to find confirmation how many positions the switches on these units ar
Read more…I have done extensive bench testing with the Sparkfun Razor 9DOF board,
and the Arduino software:
// Sparkfun 9DOF Razor IMU AHRS
// 9 Degree of Measurement Attitude and Heading Reference System
// Firmware v1.0
//
// Released under Creative Commons Licens
With the pitot tube assemblies out of stock, I was wondering if the integrated dual tube that Eagletree sells:
I'm writing a quick GPS_MEDIATEK library in order to use my MediaTek GPS with the ArduPilot Mega project and I have question about code structure. Is there a particular reason why DIYDrones has chosen to put the GPS libraries in entirely separate in
Read more…hi,
my name is honish wase.i live in pune, Maharashtra, India.i am pursuing my engineering in electronics and telecommunications and i am in final year now.
being a final year student i need to submit a project, so i decided to build a gps controlled r
