Hello,
I Already understand what the purpose is for the left, right, and center buttons as is explained http://code.google.com/p/ardu-station/wiki/UseIt in the wiki. What are the purpose of the top, top right, and bottom buttons??? I just spent about a half
Read more…https://www.youtube.com/watch?v=3JLkMAlfDdE
I assembled APMega into a EasyStar.
Its early days with the programming but radio test code works - i.e. supplies different values as sticks moved.
The Turnigy ESC beeps alot (mainly a 1Hz beep-beep-beep constant). This beep is constant except when the
Read more…What GCS do you use with Mega1.0 ?
Right now I just look at the ascii output.
You cant compile with output standard GCS data.
Can I help someware ?
Earl
Hey everybody,
This is a reprint of a reply I made in "Corrupting xBee during Ardupilot initialization". I thought it would help to bring this solution out in it's own discussion. So far I have only tested it on the bench, but I don't see any reason w
Folks,
I have build my Blimpduino but I'm having trouble working out how to inflate the envolope. I have a little bit that sticks out of the side, which looks like a hole covered in transparent plasic. As far as I can tell, this bit is sealed from t
Guys,
Hi all, just wanted to share some pictures of my new plane and my own concept for the Easyglider, being my first approach to the foam materials i though i would give it a try and implement a new design for this type of planes.
So i put my hands on the
Read more…
On my first power up for some reason RTL is messed up. I always check that this feature works befor I go off flying. But it gets home wrong the first time. If I then disconnect the battery and restart it gets it right.
Anyone have an idea as to why?O
I want to buy some nylon hinges for my airplane because the foam connections from the wings to the ailerons are cut pretty much...I've tried other methods to fix them with stuff like glue, but it restricts the movement of the ailerons. I found some n
Read more…Because I can't leave well enough alone, 2.6.3 is on the SVN. The goal right now is to update the architecture, improve performance, and remove unnecessary options.
Looks like an older version got uploaded this morning. If you did download it, please replace it with this version. It's the version Christof has been thoroughly testing and has all of the good bug fixes!
Here is a screen shot of the Loiter N times command working in the sim. It's pretty cool!
My name is Dylan and I wanted to make a UAV that I could enter in to my county and state fair for a 4H project. I want it to be able to have autonomous flight and be able to record video and have a live video feed on my laptop or tv. How much would i
Read more…I just tried out 2.6.2 with ArduPilot/IMU setup today and Stabilize did not function. whenever I switched to this mode the engine turned off. Any ideas?
Read more…Can ArduIMU be mounted up side down? I haven't read anything indicating that it can or cannot. I know the GPS plug needs to be toward the front but what about up side down. I was thinking of mounting it on the bottom of my canopy on the EZ Star .
T
Read more…Just wanted to see if anyone out there had a ArduPilot/thermopile setup go bad? Mine was working fine and had about a dozen successful flights under its belt. No crash landings or anything severe happening to the plane. The next flight on startup
Read more…Just wondering if the new MediaTek GPS receiver that the DIY Drones store is selling is going to be supported with the IMU anytime soon.
Thanks!
Read more…I wanted to get peoples opinions on this. Last week, before my ArduPilot/thermopile setup went wacky on me (servos were going crazy for no reason) I was somewhat impressed by how the thermopiles kept my airframe on a good heading and at somewhat con
Read more…