pleas can some one tell me what is hanshake message for continue acc calibratinon to next step ?
detailed:
im sending long comand (msg 76 ) id 241 0,0,0,0,1,0,0 for start calibration routine.
then APM send me " place vehicle level and press any key" tha
Read more…I am trying to use a QX1 camera for mapping. I have a SeagullUAV trigger which triggers the camera with a certain PWM pulse width and toggles the camera on/off with another pulse width on the same port.
The problem is if I set the RC7 output as a trig
Read more…
This is a discussion meant as a meeting place for people trying to get the Qualcomm SnapDragon board working with Ardupilot.
Remember to first checkout the two wiki pages: Overview and How to setup the board and build the code
Read more…I have to do a final semester project for a quad to auto-land on a target. Is this possible using and APM, a raspberry pi? I've used the APM for quite a while now, and know my way around how to get it set up, tune it and fly using it but am not too g
Read more…The FAA is gradually going to push this onto the UAV's. there is a mention of around 2020Read more…
Hello,
I sell the following fixed wing aircrafts, all the prices are negotiables and shipping costs are not included. I have more photos:
- FIBERGLASS X-8 and X-5: Both are unfinished projects and both are equipped with:
- APM autopilot with a P
Read more…Hello,
I sell this long range wifi, ideal for long range video streaming and telemetry. Its in Ebay, but if you are interested don´t hesitage to contact me.
http://www.ebay.es/itm/161954590509?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
Th
Read more…I sell this LIDAR, ideal for long sense and avoid systems, or indoor navigation systems. Its in Ebay, but if you are interested don´t hesitage to contact me.
http://www.ebay.es/itm/161954616624?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
Tha
Read more…Hi,
I would like to apologize if this question has been answered already.
is it possible to run the Paparazzi software on the Pixhawk board?
My thought process is that pixhawk is a board with a bunch of sensors, I can technically use any software i lik
Read more…Hello guys,
Noob to RC here.
I'm interested in getting into the FPV, and using it in an RC rock crawler setup.
I've done a good deal of research and came upon this thread in doing so:
http://diydrones.com/forum/topics/good-fpv-system
This is my "buy list"
Read more…Hi there, I'm new to DIY Drones and this is my first post. I'm currently working on building a drone frame. The purpose of it is for aerial photography/cinematography. However, I need a few tips or suggestions as to how I should go about choosing the
Read more…Hello to all:
I sell mi Kinect 360, ideal for indoor navigation projects. Its in ebay, but feel free to contact me:
http://www.ebay.es/itm/161954621805?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
Thanks
Jesus
Read more…Hello:
I sell this flight simulator controller, ideal to build a realistic aircraft cockpit in yout ground station. Its in ebay, but if you are interested, please feel free to contact me.
http://www.ebay.es/itm/161954684697?ssPageName=STRK:MESELX:IT
Read more…Hello:
I sell this pack of advanced Dynamixel servos, ideal for robotics projects or others. Its in ebay, but if you are interested, please feel free to contact me.
http://www.ebay.es/itm/161954599892?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l26
Read more…Why they don't longer use them? I found this and other pics of manned Tri Copters. Please see the attachment.
Read more…Hello, I need a mission such that given coordinates, drone should vertically go up by 3 meters and horizontally moves 3 meter towards given direction at a time and stops at every 3 meters (and repeats the process).
Is there an api (or anything) that I
Read more…I have a problem with Pixhawk plane wired and power as it says in manual with secondary backup power source and Zener diode. The plane was flying well while all autumn but at subzero temperature (-5C to -15C) the plane shuts down the motor in mid air
Read more…I am familiar with ROI on my flying craft but have no experience at all or knowledge of the ground vehicle firmware.
It appears from the APMRover page that this is not possible, but i believed it is/was.
Would someone please enlighten me as it would be
Read more…I am trying turn on a Sony QX1 camera using Seagull UAV. I only need to give it a certain PWM value and it will turn on the camera.
The problem is I tried to use do_set_servo and do_repeat_servo but they don't work.
I see the PWM change in the waypoint
Read more…