Hello , I set one up Pixhawk to accept 6s battery and is flying perfectly, but the OSD screen is showing a difference of 0.8 volts the actual voltage of the battery , so the battery alarm is triggering before the flight time they could get .
Coul
Read more…What are the differences between an airplane esc and a multirotor esc? If I had an airplane esc and a multirotor esc that had the same specs what would be the thing that means it is an airplane esc rather than a multirotor esc? Would it work to use a
Read more…Hi all,
I'm getting a very odd behaviour in my Skywalker's (with Pixhawk and APM:Plane 3.3.0) RUDDER . While in Manual Mode it responds correctly to the transmitter's input, in other modes managed by APM (Stabilize, FBWA, etc.) not only does it move i
Read more…I am looking for a way through which I can read binary TLog file. Actually, I am trying to develop a utility in java which could read TLog binary file and playback it. Anyone knows how Mission planner does it and playbacks the loaded TLog file ? I lo
Read more…I am using Skywalker X8 for extra long range AP work in plantations.The flying weight is 4.5kg and I use bungee takeoff.
Here is a video: https://www.youtube.com/watch?v=rZ8v_dj-HV0
I wonder if anyone has gone over 5kg with the X8?
Chris
Read more…Many of the links in the menu above point to APM.com forum stuff. You would think the login for this forum would work for that. But for me, NOPE. What the score? Anyone else have this issue?
Read more…
Finally found a bit of time to test the light 45gr 2 axis brushless gimbal we built for the Mobius camera,
PS for Cala : better late than never ;)
Read more…Dear friends, so sorry if you have discussed this topic before. If so, please refer it to me.
I have built 2 drones (just for hobby) using pixhawk and some of the best available components on the market such as Taranis, Sunnysky motors, etc, mainly fo
Read more…I have a few solid hours flying my Vario in Auto missions and have not had any real issues. Today however, once RTL was engaged at the end of a test mission the helicopter went into what I am calling a seizure! The heli oscillated in pitch and roll
Read more…Hi,
a week ago my Copter Running a Pixhawk clone and Firmware 3.2.1 dropped out of the sky. It ran beautifully but suddenly it just fell out of the sky. I checked The Battery Life and it was not the fault.
The huge Problem now is, that i cannot read t
Read more…Hello, I used the tuning procedure in the traditional helicopter wiki pages.
The results are very interesting, in stabilize the helicopter fly well
HELICOPTER = TREX450
PixHawk with HELICOPTER 3.2.1 with GPS & external magnetometer
So, I have some ask to
Read more…Hi
I am looking for a PID tuning guide for my quadcopter which has wheelbase of 700mm. Is there any possibliity that I can tune it like solo so that anyone can fly it.
Please suggest best tutorial for tuning Pixhawk or APM these are best boards but tu
Read more…Long story short, I broke the Telem2 DF-13 Connector on a spare pixhawk I have sitting around, newb mistake. Does anyone have experience repairing these? It looks like it could be soldered on but I really don't trust my soldering abilities.
Any su
Read more…I have 2 Iris+ Quadcopters, and I'm considering selling one. It's never crashed, just a roll over once which broke a prop (replaced, all in good condition). Includes all the original accessories, except for the USB telemetry antenna for your comput
Read more…Just a general question and a thought here. The Pixhawk with GPS seems to have all the things a basic (or not so basic) car or bike racing track logger might need.
Using the accelerometers and GPS position it could record cornering G's and speeds, an
Read more…I have been fiddling with the RFD900 and 3dr radios. My goal is to have a laptop with the RFD900 connected to a vehicle with either a 3dr radio or another RFD900, as well as a tablet connected to the vehicle with a 3dr radio.
By installing the same
Read more…Well, after building and crashing two homemade frames with a CC3D controller I am finding that the YAW is WAY too sensitive. When I try to YAW left or right it spins too fast. What setting will lower the control in CC3D?
p.s. I turned it into a Hex
Read more…Hi.
I am using the software elevon mixer in the ArduPlane and the problem is there is no maximum servo travel limit like EPA (End Point Adjustment) in any transmitter to ensure that the servo don't go above the limit to not brake the mechanics.
I propo
Read more…Willing to pay a knowledgeable individual who can anwser some questions for me and provide me with accurate information. The project im working on has never been done before. Currently need information regarding transmitter issues. Im very new to the
Read more…I am using a APM2.0 board. I would like to upgrade , but I cannot afford the APM2.6 yet. Anyone have a APM2.5 board in good working order for sale at a sensible price ??
Read more…