Hi all,I am clearing out my old gear since I just don't fly as much as I would like. I know these boards are old but they can still be useful.1x ardupilot mega with a 2560 processor *make me an offer1x ardupilot mega with a 1280 processor *make me an
Read more…Good evening,
I started a UAV project about a 3 weeks ago after first becoming interested a few months ago. While I have some experience with RTF helicopters and quads, This is my first fixed wing, as well as my first time building/customizing anythin
Read more…Can someone review my eeprom and compare it with their's or another hexa copter and see if its a flyable type program.? I'm kind of new to the Taranis and I would like to know if its a good eeprom. I have built a Tarot 680MM Pro and I'm using a Taran
Read more…Greetings everyone!
I am having some trouble with my Pixhawk and was looking for some feedback.
It is a power failure of sorts. I am using the pixhawk to power a multi-rotor X4 shape. When I plug my Lipo in, the pixhawk powers up like normal and does
Read more…I am working on a hexacopter using 12 motors in a coaxial configuration but connecting the motors with a y connection. I have been reading everything I can about coaxial motors and the configurations. With the design I am doing i was thinking on doin
Read more…Can a UAV gimbal be mounted on a pole?
example #1
Would be a flag pole mounted on a vehicle, then the gimbal on top of the flag pole.
Would have to come up with a shelf to hang it from and keep the battery.
example #2
I attach a pole to my Jeep and extend
Read more…Hi,
using MP 1.3.24 and heli 3.2.1 I can't get any output on Ch7 with RC7_Function=1. The 'Radio Calibration' and the 'Fail Safe' screen shows a working Ch7 input, but I don't see a Ch7 output in 'Fail Safe', every other channel works. It doesn't work
Read more…I am almost ready to test the Canon SX260. I have the Iris+ (Pixhawk) I am wondering if there is a good guide to wiring the setup to Pixhawk and the proper way to use it with DroidPlanner. I am really concerned with where the power is tapped from on
Read more…Hello Friends, I have in mind an idea, please help me.
I'm very interested in build a ArdurRover, but I'm not sure how it works the apm.
I have some questions
¿ArduPilot Mega is capable of control a servo for calculate which way to turn?.
Ie if ordered
Read more…I burned out my ArduIMU V3 and still want to play so I took my flip1.5 with the MPU6050 and created a Frankenstein version of the 3DR ArduIMU1.9 code. I got rid of the fastserial headache and used FreeIMU to initialize and retrieve the sensors over
Read more…Pretty convinced I have a compass problem, trying to determine of what nature - (hardware failure / interference) and where (internal/external). I have graphed below the MAG/MAG2 values for MagY and OfsY.
Check for understanding (the current wiki page
Read more…Good day,
I am working on getting my hex finished up and upon hooking up my receiver (X8R) to the RCIN on my Pixkhawk it is not getting powered up.
Gear:
4S battery
3DR PDB
Frsky X8R receiver (D16 mode) *tried 2 different ones
Taranis radio
All cables are h
Read more…Hello there,
Since i am new to this forums please bear with me
i have a tricopter which flips every single time when i give throttle mostly i guess it is due to those
brushless motors spinning with different (PWM) values.
i did everything as order, con
Read more…Hi - sorry for the yet another "please look at my log request"
I recently took my DIY tricopter (pixhawk) abroad for a chance to take some more interesting photos. This was my second flight of the week after a very successful loiter assisted panorama
Read more…Hi everyone,
I’m thinking of buying Microsoft Surface Pro 3 or 2 and use Mission Planner on it.
If you are currently using any of the Surface models with Windows 8, for Mission Planner, Please share your experience.
- Model/ Processor,
- Pros and
Read more…Apm Planner 2.0.17 Full Parameter List is incomplete
Hello Fellows,
i have noticed that Full Parameter List is not complete documentation offers more settings... yet they can not be found in Full Parameter List, some i could find in other place..
pls ch
Read more…Hi I'm about to buy a RFD900 but it only comes separately where as the 915mHz module for telem data comes with the Ground Station USB both together. So which Ground Station module goes with this? Do I just use the 915 GS USB module?
Read more…Just wondering if there is a unique identifier within a tlog that correlates back to a specific flight controller. I have several copters running pixhawk and sometimes can't remember which tlog goes with which copter.
Read more…I am pretty sure this was caused by the 3.3 upgrade. I have successfully calibrated the accelerometers many time recently and when I tried after 3.3 it times out and will not calibrate. I hooked up my trusty Iris after several attempts on my 550 an
Read more…I bought a 7" Tablet for my Phantom FC40. I was really disappointed since I couldn't see anything on the screen even though I was using a cardboard box as a sunshade. I bought the tablet because I don't own a smart phone and the FC40 camera uses Wi-F
Read more…