I was recently configuring the flight modes for my FrSky Taranis Plus with Mission Planner. After setting up the switches and flight modes on my Taranis, I went to configure it with Mission Planner, but Mission Planner would not read the changes in F
Read more…Droneshare's playback was great for visualization, what other tools/services can play back .tlog or .BIN in a similar way ?
Read more…hi.
In this video is suggested to use ThrIn value to set throttle mid value.
https://www.youtube.com/watch?v=NOQPrTdrQJM
In wiki is suggested to use ThrOut value to set throttle mid value.
http://copter.ardupilot.com/wiki/ac_throttlemid/
Hi everyone,
Two years of research and dozens of hours building and tweaking and my Skywalker 1900 has finally flown
. Absolutely awesome. Everything seems to be working just fine at the moment( except HIL ever since upgrading from 3.4 to 3.5)
My big
Read more…The pitch servo and throttle are constantly pulsing very quickly in auto modes:
I've done a fresh flash whipping all old settings and re-tuned my plane with the same result. Does anyone know what can cause this issue? I'm worried it might be a bug and
Read more…I'm flying an Arduplane with telemetry. I've noticed while in "AUTO", passing through a "way point" the throttle and current goes up. Is there a parameter that I can change to lower the throttle? Or any help will be appreciated.
Thx, Brian
Read more…Hello,I'm flying a plane with APM2.6 and Ardupilot 3.4.I have (not yet) an windspeed indicator.The plane is controlled by Rudder, elevator and throttle only.In normal, low wind, conditions everything appears to be okay.However in Auto mode, flying a
Read more…Hello,
I've just finished to built a DJI Inspire clone with an APM 2.7 flight controller. It arms perfectly but haven't had the chance to fly it for the fist time because after arming, all the motors start spinning fine and after 30 seconds or a minut Read more…Hello
This is a open source software of a touchscreen GUI for RTKlib made for a Rasperry Pi 2 and the 5 inch HDMI touchscreen, the software is done with QT 4.5 on a Raspian OS.(can work on any linux machine too)
This project was developped by a student
Read more…Hello guys,
i have built my own quad-copter using apm2.8, everything is working fine, and the quad is doing its autonomous missions with success..
My question is, lets say i have 5 way-points in my mission.. how should i make my quad-copter land on eve
Read more…Hi friends,
Im a student engineer and im working on a project to build a tactical UAV. According to the datasheet the MTOW is about 450 kg, the range is between:150-300 km, and my primary study shows that the cruise speed is around 130 km/hour while t
Read more…Just joined....we are building a T18 with the Tarot 5008 motors. Need suggestions on good ESC options and 18" propellers. Have been thinking about foldable props. Also, suggestions on a dslr type camera and gimbal.
Read more…Hi Guys,
I have a Pixracer with APM Copter V3.3.4-rc3. I connected 2 different types of "spektrum like" satellites (DSMX : R110XL, DRX Orange RX) on the RC Input port of my pixracer using the RC IN, VDD 3.3V and GND pins.
But on Mission Planner, in the
Read more…hey guys,
Well, i am working on a project using apm2.8 ardupilot, and i need to make a live transmission video using MinimOSD. I have found the code on DIYDRONES repository on github, but it seems that its not up to date with the version of Arduino ID
I recently had a very bad crash with my quadcopter (pilot error) which had previously been flying well. Ever since the crash (and repair), I have been unable to take off. I experience a flip to one side or another on takeoff.
I am running an APM 2.6
Read more…1. I like using the Grid V2 method a lot. But is there a way to view the Overlap and Sidelap, and adjust them, when using this method of flight planning?
2. In 'Grid' , and 'Simple' tab, there is a checkbox for 'Camera top facing forward'. Is this t
Read more…I've done some research on this topic, but I couldn't find nothing recent, so I'd like to know if anyone has tested it recently and if it improves that drone performance
Read more…en necesario calibrar el compas para cada vuelo? en que modo de vuelo debe estar el control remoto para usar la telemetria? la telemetria en que modo de vuelo debe inciar la ruta autonoma?
Read more…Hi All, ( PixHawk QuadX FW 3.2.1 MP 1.3.35 )
(I hope this topic is in the right forum?)
Is there a Param / Value to adjust for the time it takes when one issue a Radio DisArm Cmd
to when the motors actually stop spinning.
By observation I see th
Read more…