Hello,
After a lot of fun with my Arducopter, I would like to learn & play with a separate board,
I found sheep sensor modules at atmel like :
What's your advice to choose between them ?
Thanks in advance,
Pascal
Read more…
I wanted to take a minute to introduce myself and our company.My name is Mike Metcalf and I represent Engineering & Scientific Innovations, Inc. We are located in Cincinnati, OH right off I-75. Recently, we have finished the construction on a Wind
Read more…Hey
I have a MikroKopter Hexacopter frame and plan to integrate the ArduCopter autopilot.
The idea is to design my own frame for the camera mount.
Before I can start designing the frame I need to know what the weight is of all the other components on
Read more…Uh-oh! The mini-USB port just broke off of my oil pan. I tried soldering it back on, to no avail. Has this happened to anyone else, and is there anything I can do?
Read more…Is there any hope of getting Octo support with AC2 in the future?-Lee
Read more…I have a Turnigy radio and would like to flash the firmware. I do not have an AVR Dude pocket programmer and was wondering if I could use my Arduino Duellinova inplace of the pocket programmer to flas the firmware?
How would I connect the wiring to
Read more…I have my Y6 sitting on my work bench and have the APM Planner open and I'm running the GCS Mavlink app. Roll and pitch numbers move a little but only by 0.01 but my YAW number jumps all around. Also the red needle for heading is moving all around t
Read more…Greetings all!
The idea of creating a civilian UAV is not new to me (it's been floating around in my head for about 6 years now). I am however very surprised and pleased to find out how inexpensive it actually is. I thought the technology to actually
Read more…Hello, I have just updated to the latest 2.05 code and been through all of the reinitialisation steps, but I'm struggling to get the motors working right.
On the first 2 attempts at calibrating the ESCs, the AC2 Setup screen that shows the motor outpu
Read more…Hi all, when searching the Net for nice looking Domes I can find a Lot.
But I cant find Flat Looking Domes for my DIY Projects. So I made now for me and all Multicopter Pilots Three Size of Domes. Made from PP 0,8mm, Very very Tough but flexi too.
Sale
Read more…Overwatch, Inc. (www.riskoverwatch.com ) provides drone insurance.
Let us know what you need in terms of coverage for your drone so we can continue to create and improve the products we are offering. Your feedback is important.
Who is insuring your
Read more…This would be a question for Jason, but anyone else who knows the code could explain this feature?Looks like it will engage stabilize roll and pitch on certain amount of input.if(abs(g.rc_1.control_in) >= ACRO_RATE_TRIGGER){output_rate_roll(); // rat
Read more…Are the DIP switches no longer used? Just wanted to clarify that they all should be up - Thanks
Mike
Read more…
HI All,
Background:
I'm running ACM 2 code from todays trunk ( r2336 ).
I'm doing PID tuning in APM Planner 0.4.30 in the "PID Config - AC2 MAVLINK" window.
Problem:
when I try to save some of my modified PID settings, it behaves like it's worked ( I
Read more…I'd like to float this idea out there to get some feedback. I currently have 3 planes and one heli, but these don't seem to be right for the kind of UAV platform I'm looking for. A hybrid airship seems like it could provide superior flight duration a
Read more…Hi All,
I just downloaded the latest HK GCS 1.2.96. I notice now when I swtich APM to stabilise mode, the GCS reports that it is in "Guided Mode" (sorry don't have the exact wording on me as I am at work). At first I was worried that I had set the mo
Read more…
Does anyone have any information on this board? I bought a couple to take the LEA-4T off - it's a long story but I need the phase measurements and the UBLOX 4 series is fine - but it occurs to me that I may be taking it off this board just to put i
Read more…In my setup I'm using 5 out of 6 channels on TX (5th is used for APM Mode switching). So, maybe I can use extra channel for uploading missions to UAV while flying in TX range?
More ideas about:
-Most of us have TX-USB cable for sim purposes, so we can
Read more…Over a year ago, Bill Premerlani published a paper describing a method of automatically and continuously determining magnetometer offsets when the aircraft is in motion. Has anyone added that code to ArduIMU 1.8.2 version?Hopefully the link to that t
Read more…I'm running ArduPiratesNG build 527. One of the motors on my quad stopped during flight. I'd like to check the logs to figure out whether there's anything useful there. How should I do it?
It seems like I can dump the radio signals in CLI, but that do
Read more…